|
|||
Test Description | MIL-STD-883 | ||
Method | Condition | In House | |
Salt Spray | 1001 | - | |
Moisture Resistance | 1002 | II | |
Mechanical Shock | 2004 | - | |
Barometric Pressure | 3001 | - | |
Internal Visual | 2017 | - | |
Stabilization Bake | 1008 | 24 hrs @ 150°C | |
Temperature Cycle | 1010 | -65°C to 150°C | |
Constant Acceleration | 2001 | 5000 G y1 | |
Hermetic Seal (Fine & Gross) | 1014 | A and C | |
Burn In | 1015 | 168 hrs @ 85°C | |
External Visual | 2009 | - | |
Steady State Life | 108 | D |
Test Description | MIL-STD-202 | |
Method | Condition | |
Vibration | 204 | G |
Thermal Shock | 107 | A-1 |
Salt Spray | 1009 | A |
Moisture Resistance | 106 | - |
Mechanical Shock | 213 | I |
Barometric Pressure | 105 | C |
Resistance to Solder Heat | 210 | B |
Lead Integrity | 2004 | B2 |
Test | Method | Conditions (PI) |
External Visual | 2009 | |
PIND | 2020 | |
Temperature Cycling | 1010 | C, 20 Cycles |
Temperature Cycling | 1010 | C, 10 Cycles |
Mechanical Shock | 2002 | B, Y1 Direction or 3000 g's, Y1 Direction |
Seal (Fine and Gross) | 1014 | |
Visual Examination | 1010 | |
Endpoint Electrical | * | |
Steady state life | 1005 | 1000 hours at 125°C or equivalent (1005) |
Endpoint Electrical | * | |
Internal Water Vapor | 1018 | |
Internal Visual and Mechanical | 2014 | |
Wire bond strength | 2011 | |
Element Shear | 2019 | |
ESD | 3015 | |
* in accordance with the applicable device specification |
Description | Method | Condition (PI) |
Thermal Shock | 1011 | C |
Stabilization Bake | 1008 | 150°C, 1 Hour |
Lead Integrity | 2004 | B2 |
Seal (Fine and Gross) | 1014 | A, D |
Salt Atmosphere | 1009 | A, D |
Metal Package Isolation | 1003 | 600 V DC , 100 nA Max. |
Test | Method | Conditions (PI) |
Preseal Burn-in | 1030 | |
Non-Destructive Bond Pull | 2023 | |
Internal Visual | 2017 | |
Temperature Cycling | 1010 | C, 10 Cycles |
Mechanical Shock or Constant Acceleration | 2002/2001 | B, (Y1 Direction) 3000 g's, Y1 Direction only |
PIND | 2020 | Condition A shall be used for Class K, unless otherwise specified. |
Pre Burn-in Electrical | * | |
Burn-in | 1015 | |
Final Electrical Test | * | |
Seal (Fine and Gross) | 1014 | |
Radiographic** | 2012 | |
External Visual | 2009 | |
* in accordance with the applicable device specification ** Will be designed to meet requirements, but Radiographic Test Results not included. |