Home | | | | | Power Entry Panels

Power Entry Panels

The Power Entry Panel (PEP) offers ideal Input/Output power interface for shelters of all classification in the DOD portfolio. It features both +24/28 VDC to 200 Amps and 3-Phase AC to 60 Amp per phase input/output distribution capability. Additionally, the PEP includes a 3-Phase 60 Amp pass through connector interface to support additional Forward Operating Base requirements. The PEP has undergone vigorous testing in number of areas and has been found to meet the Army required wide operation temperature range of -46º C to 60 º C, as well as MIL-STD 810: Shock, Vibration, Rail Impact, Water Tightness, Fungus, and MIL-STD 461E EMC requirements.

  • Rugged Field Packaging
  • Environmentally Sealed Enclosure or Open Panel
  • Battery Charger Capability
  • Circuit Breaker Over Current Protection
  • Sequencing to Individual Outputs
  • Single Phase AC or Three Phase AC
  • Horizontal Rack Mount
  • Various Height Options
  • Non - Rack Mount Designs
  • Variety of Receptacles and Plug Configurations
  • Customer Private Label
  • Surge Suppression
  • Elapsed Time Indicator
  • Local Power Meter
  • Circuit Protection with UL Breakers
  • Various Input Voltages & Current Configurations
  • Outlet Sequencing
  • On/Off Control
  • EMI Filtering
  • Power Monitoring (Voltage and Current)
  • Power Quality Monitoring & Management
  • Buss Bars
  • Status Indicators
  • EPO
  • Wide Operating Temperature Range
  • Designed to Meet MIL-STD 810F Requirements
Part Number 7200-A-125
Power Entry Panel
Input Power 208/120 VAC, 3Ø WYE 60Hz, 60A +28 VDC, 200A 
+28 VDC, 200A
Communication Network N/A
Physical 13.13" H x 13.38" W x 16.10" D
Weight 72 lbs
Environmental Wide Operating Temperature Range per Mil-STD-810F
-46°C to 50°C (-50°F to 122°F)
Output Power J2 - 208/120 VAC, 3Ø WYE
J3 - 208/120 VAC, 25A
J4 - 120 VAC, 15A & +24 VDC, 35A
J5- 120 VAC
AUX - 120 VAC @ 15 Amps

Internal Shelter Power
(4 x 1/4 - 20 Threaded Studs AC Power)
(4 x 1/4 - 20 Threaded Studs DC Power)
Status Output Terminal Block - 10 x 6-32 Screws
Ground Lugs Vehicle Ground - 3/8 - 16 Stud
External Ground Rod Stud - 3/8 - 16 Stud
Battle Mode Switch No
Battery Charger Power
(When Connected to Shore Power)
28 VDC @ 5 Amps
Part Number 7200-A-125
Power Entry Panel
Connectors (J2) Export Power: MIL-C-22992 (MS90555C32412S)
(J3) Environmental Control Unit Power: MIL-C-5015 (MS3454W24-10S)
(J4) DC Power Supply: MIL-C-5015 (MS3454W20-14S)
(J5) PTIP Interface: MIL-C-5015 (MS3454W24-10SW)
(J8) GCFI Power: MIL-C-5015 (MS3452W22-2S)
Auxiliary Connectors (J6) EPO Kill-Switch
(J7) External Status Indicator DC Signals

  • Sheet and Machined Metal Design
  • Metal Fabricating and Finishing
  • PCBA Design, Simulation, and Fabrication
  • Cable Management
  • Testing
  • Circuit Simulation
  • 3D Modeling
  • Thermographic Analysis
  • Heat Management Modeling