Home | | | | | Power Entry & Export Panels

Power Entry & Export Panels

Intelligent 3-Phase Power Entry/Export Panel

The Intelligent 3-Phase Power Entry/Export Panel is designed for on the go applications in Tactical Vehicles and includes a Transfer Switch to permit reliable uptime for C4ISR equipment and other mission critical hardware in transit cases. Upon detection of poor power present from shore or community power, the Export Power Panel will transfer back to vehicle inverter operating temperature range tested to -46º C to 60 º C (-51 º F to 140 ºF.) The Power Entry and Export Panel is tested to and passes MIL-STD 461 E Army & MIL-STD 810 requirements.

  • Rugged Field Packaging
  • Environmentally Sealed Enclosure or Open Panel
  • Battery Charger Capability
  • Circuit Breaker Over Current Protection
  • Sequencing to Individual Outputs
  • Single Phase AC or Three Phase AC
  • Horizontal Rack Mount
  • Various Height Options
  • Non - Rack Mount Designs
  • Variety of Receptacles and Plug Configurations
  • Customer Private Label
  • Surge Suppression
  • Elapsed Time Indicator
  • Local Power Meter
  • Circuit Protection with UL Breakers
  • Various Input Voltages & Current Configurations
  • Outlet Sequencing
  • On/Off Control
  • EMI Filtering
  • Power Monitoring (Voltage and Current)
  • Power Quality Monitoring & Management
  • Buss Bars
  • Status Indicators
  • EPO
  • Wide Operating Temperature Range
  • Designed to Meet MIL-STD 810F Requirements
Part Number 7200-A-126
Power Entry and Export Panel
Input Power 208/120 VAC, 3Ø WYE 60Hz, 30A
Communication Network LAN 10/100 TCP/IP. TELNET, SNMPv2
Physical 7.313" H x 20.5" W x 18.61" D
Weight 62 lbs
Environmental Wide Operating Temperature Range per Mil-STD-810F
-46°C to 50°C (-50°F to 122°F)
Output Power J2- 120 VAC @ 20 Amps
J5- 120 VAC @ 20 Amps
J6- 120 VAC @ 20 Amps
J7- 120 VAC @ 20 Amps
J8- 120 VAC @ 20 Amps
J9 - 120 VAC @ 30 Amps
Ground Lugs Vehicle Ground - 3/8 - 16 Stud
External Ground Rod Stud - 3/8 - 16 Stud
Battle Mode Switch Yes
Battery Charger Power
(When Connected to Shore Power)
28 VDC @ 10 Amps
Part Number 7200-A-126
Power Entry and Export Panel
Connectors (J2) Battery Charge Power: MIL-C-5015 (MS3452W16-11PW)
(J5) Roadside MEP Power: MIL-C-5015 (MS3452W22-2S)
(J6) Curbside MEP Power: MIL-C-5015 (MS3452W22-2S)
(J7) Rear MEP Power: MIL-C-5015 (MS3452W22-2S)
(J8) GCFI Power: MIL-C-5015 (MS3452W22-2S)
(J9) Radio Rack Power: MIL-C-5015 (MS3452W22-2S)
  • Sheet and Machined Metal Design
  • Metal Fabricating and Finishing
  • PCBA Design, Simulation, and Fabrication
  • Cable Management
  • Testing
  • Circuit Simulation
  • 3D Modeling
  • Thermographic Analysis
  • Heat Management Modeling