When your circuit design requires amplitude compression, Spectrum Control delivers the RF limiting function with its line of RF limiting amplifiers. These amplifiers are useful for protecting subsequent components from input overdrive and removing amplitude modulation from FM signals.
Part Number | Freq. Band (GHz) |
Operating Temp (°C) |
Insertion Loss (dB) |
Iso- lat- ion Min. (dB) |
Peak Input Pow- er Max (W) |
Output Flat Leak- age (CW & Pulse) |
Spike Leak- age (RF rise time ≥ 15ns) |
Recov- ery Time* |
VSWR (Pin ≤ -10dBm) |
||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min | Max | Min | Max | Typ | Max | Input | Output | ||||||
MALI-010365-000000 | 2.7 | 3.8 | -10 | 65 | 0.3 | 0.5 | 50 | 100 | +19 dBm | 10 nJ | 500 nS | 1.5:1 | 1.5:1 |
MALIML0024 | 2.7 | 3.8 | -10 | 65 | 0.3 | 0.5 | 35 | 100 | +19 dBm | 10 nJ | 500 nS | 1.5:1 | 1.5:1 |
Notes: Applies over the frequency range @ +25°C, output and input load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values. * Normal Operating (to within 3db of I/L at input power test conditions) |
Part Number | Frequency (MHz) | Gain (dB) Typ | Input Power Limiting Range (dBm) | Output Level Saturated (dBm) Typ | Output Power Flatness (dB) Typ | Noise Figure (dB)Max | VSWR In/Out |
Power Type | ||
---|---|---|---|---|---|---|---|---|---|---|
Min | Max | (Vdc) | (mA) | |||||||
BXL9653 | 5 | 500 | 30.0 | -33 to +10 | -4.0 | ±1.0 | 11.0 | 2.0:1 | +15 | 60 |
TML9052 | 5 | 500 | 7.0 | -3 to +7 | -4.0 | ±0.5 | 11.0 | 2.0:1 | +15 | 20 |
TML9053 | 5 | 500 | 7.0 | -6 to +7 | -4.0 | ±1.0 | 10.5 | 2.0:1 | +15 | 20 |
TML9002 | 50 | 500 | 11.0 | 0 to +20 | +7 | ±0.7 | 9.0 | 2.0:1 | +15 | 54 |
TML9004 | 50 | 500 | 9.0 | 0 to +20 | +8 | ±1.0 | 9.0 | 2.0:1 | +12 | 50 |
TML9017 | 10 | 1000 | 9.5 | 0 to +20 | +7 | ±1.0 | 7.5 | 2.2:1/2.0:1 | +15 | 36 |
ENL9654 | 10 | 1000 | 50 | -52 to +10 | +7 | ±1.0 | 7.5 | 2.2:1/2.0:1 | +15 | 36 |
BXL9812 | 8000 | 12000 | 28 | -20 to -10 | +10 | ±1.0 | 5 | 2.0:1 | +15 | 165 |
|
|
|
|
|
|