(100% testing unless otherwise specified)

• Thermal Shock: 5 cycles from -55°C to +125°C in accordance with MIL-STD-202, Method 107D, Condition A.
• Burn-in: 100 hours at 1.4x rated DC voltage, 125°C.
• Seal Test: MIL-STD-202, Method 112, Test Condition A. Hermetic seal parts only.
• Capacitance and Dissipation Factor: MIL-STD-202, Method 305, frequency 1kHz.
• Dielectric Withstanding Voltage: 2.5 times the rated DC voltage for 5 ± 1 second at 25°C, with 50 mA maximum charging current.
• Insulation Resistance: MIL-STD-202, Method 302, 125°C at rated DC voltage and room temperature (25°C). The 125°C requirement shall be 10% of the specified catalog IR at 25°C.
• DC Resistance: MIL-STD-202, Method 303.
• Insertion Loss Test — Sample per MIL-F-15733. At full rated load in accordance with MIL-STD-220. The minimum insertion loss shall be defined in the filter catalog.
• Visual and Mechanical: in accordance with MIL-F-15733.
• Marking: All filters which have successfully completed the test sequence shall be marked with an "R" in the second part of the number. For example, a standard SCI-2130-004 becomes SCI-R2130-004 and 9051-100- 0000 becomes 9051-R100-0000, and 51-719-011 becomes 51-R719-011 after completion of the Hi-Rel Level "R" Test Sequence.