|
All filtered connectors undergo extensive testing
to assure that all product meets our high quality
expectations. Many of the tests are performed 100%
as routine and others are carried out on a sample
basis when this is deemed more meaningful.
|
Visual
The connectors shall be manufactured and processed
in a careful and workmanlike manner in accordance
with good design and sound practice. All connectors
shall be checked 100% to insure dimensions are as
shown in this catalog.
|
Capacitance
Checked on 100% of the contacts per detailed
specifications when measured @ 25°C, 1 KHz, 0.1 to
1.0VRMS. On insulated feed-thru lines, the maximum
capacitance is 25 pF.
|
Dissipation factor
4% maximum, checked 100% @ 25°C, 1KHz, 0.1 to 1.0VRMS
|
Dielectric withstanding voltage
Performed on 100% of the filtered contacts. The test
voltage unless otherwise specified will be 2.5 times
the working voltage as specified at 25°C. This voltage
will be applied for 1 to 5 seconds with the charging
current limited to 50 milliamps.
|
|
|
 Contact a Quality Representative |
Insulation resistance
Performed on 100% of the filtered contacts at
25°C. The minimum acceptance level will be 1000
megohms at 25°C and 100 megohms at 125°C if
required. This test will be carried out in accordance
with MIL-STD-202 Method 302, test voltage of
100VDC or at rated voltage whichever is less.
|
Insertion loss
Performed on a sample quantity of filtered contacts, minimum
acceptance levels as specified by typical insertion
loss graphs.
|
Resistance to ground
The RDC on ground lines is 5 milliohms max.
|
Marking
As a minimum, all connectors shall have the Spectrum
part number, date code and logo. Upon request,
customer specified marking can be incorporated
into the manufacturing cycle.
|
Special Testing
Spectrum has a fully qualified test laboratory and is
willing to provide additional acceptance testing upon
customers request, at minimal additional costs.
|
|
Solutions
